Best
Best Bike Pedal Wrenches for Adult Tricycles
Five pedal wrenches compared for jaw size, handle length and leverage on stuck pedals.
Updated · 3 min read · 5 products evaluated
Pedals are not tightened to a torque number. A pedal goes in to roughly hand-tight plus a firm pull on the wrench, and that is enough because pedaling force tightens the threads. What matters is the tool and how you use it.
Two facts catch new owners out. The left pedal is reverse threaded, so it loosens clockwise when you face the crank. And a seized pedal needs leverage, which is why handle length is the main thing separating these wrenches.
Short answer
The Jaswill 4 in 1 is the best overall with a 320 mm handle, two 15 mm jaws and a 9/16 inch jaw. The groword is the near twin with a PVC coated handle. The Pawfly 3 in 1 adds crank puller and bottom bracket openings. The Nainsect has a slanted offset handle and 15, 16 and 17 mm sizes. The Mantain is the lowest cost and shortest handle.
Quick Picks
Our 5 recommendations at a glance. Tap a pick for the full verdict.
Our Picks
Best Overall1 of 5
Jaswill 4 in 1 Pedal Wrench
A long 320 mm handle and the sizes most pedals need.
Best for
Seized pedals
Why we like it
It has two 15 mm spanners, one 9/16 inch spanner and three hex sockets of 6, 8 and 10 mm. The heavy-duty steel is 5 mm thick with a quenched heat treatment, and the 320 mm handle gives real leverage.
The long handle is the difference against the shorter Mantain and Nainsect, because a stuck pedal on a trike often takes a firm pull. It is too long for a seat bag. Match the jaw to your pedal flats; most are 15 mm, and the 9/16 inch jaw covers older pedals. It is a newer product with limited history.
Key specs
| Size | 320 mm handle, 5 mm thick steel |
|---|---|
| Features | Two 15 mm jaws, 9/16 inch jaw, 6, 8 and 10 mm hex sockets |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Covers 15 mm and 9/16 inch
- Long 320 mm handle
- Hex sockets add uses
- Heavy duty steel
Limitations
- Too long for a seat bag
- Newer product, little history
Consider it if
- Stuck pedals
- Home repair
Skip it if
- Carrying on rides
Best PVC Handle2 of 5
groword 4 in 1 Pedal Wrench
The same layout as the Jaswill with a PVC coated grip.
Best for
Comfortable grip
Why we like it
It offers two 15 mm bayonets, one 9/16 inch bayonet and three hex sockets of 6, 8 and 10 mm. Laser cut jaws and a quenched finish give a tight fit, and a 320 mm PVC coated handle is non slip.
It is very close to the Jaswill, so the choice often comes down to grip and price. Size numbers are marked on the wrench, which helps when switching between ends. Check that the jaw you select seats fully on the pedal flats before applying force.
Key specs
| Size | 320 mm handle |
|---|---|
| Features | 15 mm x2, 9/16 inch, 6, 8, 10 mm hex, PVC coated grip |
Specs can change between model years; confirm the exact version before buying.
Strengths
- PVC coated non slip handle
- Numbered jaw sizes
- Same 320 mm leverage
- Hex sockets included
Limitations
- Too long for a seat bag
- Near twin of the Jaswill
Consider it if
- Comfortable grip
- Home repair
Skip it if
- Carry along use
Best Multi Task3 of 5
Pawfly 3 in 1 Pedal Wrench
Pedal, crank puller and bottom bracket openings in one wrench.
Best for
Home mechanics
Why we like it
It has openings of 15 mm for pedals, 16 mm for crank pullers and 24 mm for bottom bracket tools, each marked with its size. The 5 mm high-carbon steel is 320 mm long with a rubber grip, and the surface is 3 layer electroplated.
It does more than the Jaswill, but has no 9/16 inch jaw and no hex sockets. The 16 and 24 mm openings suit crank and bottom bracket work, though you still need the matching extra tools. Confirm that your pedals are 15 mm before ordering.
Key specs
| Size | 320 mm long, 5 mm thick steel |
|---|---|
| Features | 15 mm pedal, 16 mm crank puller, 24 mm bottom bracket openings |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Three useful openings
- Thick 5 mm high-carbon steel
- Size marks on each opening
- Non slip rubber handle
Limitations
- No 9/16 inch jaw
- No hex sockets
Consider it if
- Home mechanics
- Crank and bottom bracket work
Skip it if
- Older 9/16 inch pedals
Best Offset Handle4 of 5
Nainsect Double Sided Pedal Wrench
A slanted handle and three jaw sizes keep knuckles clear.
Best for
Knuckle clearance
Why we like it
It has double sided jaws of 15, 16 and 17 mm, a precision steel body and a plastic grip. The slightly slanted design helps keep knuckles away from the frame, and it is meant to be turned toward the front of the bike when installing.
The shorter handle gives less leverage than the 320 mm Jaswill, so a very stuck pedal may need a cheater bar or penetrating oil. It fits 15 mm pedals as well as the 16 and 17 mm sizes used on some pedals. The slant is a real help on a trike where the frame sits close to the pedal.
Key specs
| Features | 15, 16 and 17 mm jaws, offset slanted handle, plastic grip |
|---|
Specs can change between model years; confirm the exact version before buying.
Strengths
- Three jaw sizes
- Offset handle saves knuckles
- Comfortable grip
- Light to carry
Limitations
- Less leverage than 320 mm tools
- Plastic grip on a steel body
Consider it if
- Tight frame clearance
- Carrying
Skip it if
- Badly seized pedals
Lowest Cost5 of 5
Mantain Double Sided Pedal Wrench
A basic three size wrench for easy pedals.
Best for
Occasional use
Why we like it
It has three jaw sizes of 15, 16 and 17 mm, a carbon steel body with a rust resistant electrophoresis finish and a plastic grip.
It is the simplest and least costly here, with moderate length. Against the Nainsect it has no slanted handle and, against the 320 mm tools, less leverage. It suits pedals that come off easily, but a seized pedal may need a longer handle. It is a newer product with limited history.
Key specs
| Features | 15, 16 and 17 mm jaws, carbon steel, plastic grip |
|---|
Specs can change between model years; confirm the exact version before buying.
Strengths
- Three jaw sizes
- Rust resistant finish
- Plastic grip
- Low cost
Limitations
- Moderate leverage
- Newer product, little history
Consider it if
- Easy pedals
- Tight budgets
Skip it if
- Stuck pedals
Spec Comparison
Key figures side by side. A dash means the brand gives no figure, so ask before you buy if it matters to you.
| Model | Size | Features | Link |
|---|---|---|---|
| Jaswill 4 in 1 Pedal Wrench Best Overall | 320 mm handle, 5 mm thick steel | Two 15 mm jaws, 9/16 inch jaw, 6, 8 and 10 mm hex sockets | Check price |
| groword 4 in 1 Pedal Wrench Best PVC Handle | 320 mm handle | 15 mm x2, 9/16 inch, 6, 8, 10 mm hex, PVC coated grip | Check price |
| Pawfly 3 in 1 Pedal Wrench Best Multi Task | 320 mm long, 5 mm thick steel | 15 mm pedal, 16 mm crank puller, 24 mm bottom bracket openings | Check price |
| Nainsect Double Sided Pedal Wrench Best Offset Handle | — | 15, 16 and 17 mm jaws, offset slanted handle, plastic grip | Check price |
| Mantain Double Sided Pedal Wrench Lowest Cost | — | 15, 16 and 17 mm jaws, carbon steel, plastic grip | Check price |
How We Chose These Pedal Wrenches and Torque Tools
- Jaw size
- We checked for 15 mm, the common pedal size, and for 9/16 inch or 16 and 17 mm options.
- Handle length
- Longer handles give leverage for seized pedals, which matters on a trike.
- Material and grip
- Thick steel and a non slip grip help avoid slipping off the flats.
- Extra tasks
- Hex sockets and crank openings add value for home mechanics.
What to Look for in a Pedal Wrench
Thread direction
The right pedal has a normal thread, and the left pedal is reverse threaded. Facing the crank, the left loosens clockwise. Turning it the wrong way tightens it.
A useful rule is to turn the wrench toward the front of the trike to tighten and toward the back to loosen, on both sides.
Jaw size
Most pedals use 15 mm flats, and some older or one piece crank pedals use 9/16 inch.
Check the flats on your pedal spindle, and pick a wrench that matches.
Leverage
A longer handle multiplies force, and a stuck pedal needs it. A 320 mm tool does the work with less effort than a short one.
Penetrating oil on the threads helps, and a firm steady pull is better than a jerk.
How tight to go
Pedals need roughly hand-tight plus a firm pull, not a torque number. Pedaling tightens them further.
Add a light film of grease to the threads when installing so the next removal is easy.
How to Choose
By Pedal Condition
| Situation | Our pick | Why |
|---|---|---|
| Seized pedal | Jaswill 4 in 1 Pedal Wrench | 320 mm leverage |
| Seized pedal, softer grip | groword 4 in 1 Pedal Wrench | 320 mm with PVC grip |
| Tight frame clearance | Nainsect Double Sided Pedal Wrench | Offset handle |
| Also doing cranks | Pawfly 3 in 1 Pedal Wrench | Crank puller opening |
| Easy pedals, low cost | Mantain Double Sided Pedal Wrench | Basic and inexpensive |
Long Handle vs Short Handle
- Long
- The Jaswill, groword and Pawfly are 320 mm and give strong leverage but do not fit a seat bag.
- Short
- The Nainsect and Mantain are easier to carry but give less pull.
Default to a 320 mm tool for home use.
For Seized Trike Pedals Specifically
- Look for
- A long handle, thick steel and a jaw that seats fully.
- In this comparison
- The Jaswill 4 in 1 matches all three.
When to Spend More
- Spend more if
- You do your own crank and bottom bracket work, where the Pawfly saves buying tools.
- Save if
- You only swap pedals now and then, where the Mantain is enough.
Frequently Asked Questions
Do pedals need a torque wrench?
Not usually. Roughly hand-tight plus a firm pull on the wrench is enough, and pedaling tightens them further.
Which way does the left pedal turn?
The left pedal is reverse threaded, so it loosens clockwise when facing the crank.
What size is a pedal wrench?
Most pedals use 15 mm flats. Some older pedals use 9/16 inch.
Why does a long handle help?
It multiplies the force you apply, which helps with a seized pedal.
Should I grease the threads?
Yes, a thin film of grease on the threads makes the next removal easier.
Bottom Line
The Jaswill 4 in 1 is the best all round pedal wrench for trike owners, thanks to its 320 mm leverage. Check your pedal flats and thread direction before you start.