Best
Best Water Bottle Holders for Adult Tricycles
Most trikes have no bottle-cage bosses, so a clamp-on holder is often the practical answer.
Updated · 2 min read · 5 products evaluated
A standard bottle cage needs two threaded holes in the frame, and most adult trikes do not have them. That leaves two routes: a handlebar clamp holder, or a cage mounted on a clamp adapter or a handlebar. If your trike does have bosses, a regular cage is lighter and cheaper.
Before ordering, check the bar diameter for clamp holders and the bolt spacing for cages. A cage that fits a 24 oz bottle snugly may not hold a wide insulated bottle.
Short answer
The Accmor 2-in-1 holder is our top pick for trikes without bosses, since it clamps to the bar and holds a drink and a phone. The Lamicall cage mounts on a bar or tube and has a tracker slot. The FiveBox aluminum cage is the choice if your frame has threaded bosses.
Quick Picks
Our 5 recommendations at a glance. Tap a pick for the full verdict.
Best 2-in-1
Accmor Cup Holder with Phone Holder
Riders who want both within reach
Best for Theft Worry
Lamicall Bike Bottle Holder with Tracker Storage
Riders wanting extra theft protection
Our Picks
Best Overall1 of 5
Accmor Universal Cup Holder
A clamp-on holder for cups and bottles up to 3.4 inches wide.
Best for
Trikes without cage bosses
Why we like it
The Accmor clamps to a bar with a rubber pad that does not slide, and the holder rotates 360 degrees. Three flexible plastic grippers hold cups and bottles up to 3.4 inches in diameter. It was built for strollers, walkers and wheelchairs, so it works on thick, round tubes.
Versus the Accmor phone version, this one is cup-only and costs less. It handles a coffee cup or a tall bottle better than a standard cage and needs no frame holes. Check the clamp range against your bar.
Key specs
| Fit and mounting | Rubber-pad clamp, 360 degree rotation |
|---|---|
| Features | Holds cups and bottles up to 3.4 in wide |
Specs can change between model years; confirm the exact version before buying.
Strengths
- No frame holes needed
- Holds cups up to 3.4 inches
- Rubber pad grips the bar
- Rotates 360 degrees
Limitations
- Adds bulk to the bar
- Confirm the clamp range first
Consider it if
- Trikes without bosses
- Coffee cup riders
Skip it if
- Weight-conscious riders
Best 2-in-12 of 5
Accmor Cup Holder with Phone Holder
Holds a bottle and a phone from the same clamp.
Best for
Riders who want both within reach
Why we like it
This version adds a phone holder beside the cup, so you can see messages and calls. Silicone petals lock the drink and a rubber-padded clamp turns 360 degrees.
It costs more than the plain Accmor and takes up more bar space. It is a good pick on a leisure trike with a roomy bar. Check the swing room around your brake levers.
Key specs
| Fit and mounting | Rubber-pad bar clamp, 360 degree rotation |
|---|---|
| Features | Cup holder plus phone holder |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Drink and phone together
- Silicone petals hold the drink
- Rotates 360 degrees
- No tools for installation
Limitations
- Bulkier on the bar
- Phone pocket is not a locking mount
Consider it if
- Leisure riders
- Hot day rides
Skip it if
- Crowded bars
Best for Theft Worry3 of 5
Lamicall Bike Bottle Holder with Tracker Storage
A cage with an adjustable knob and a hidden slot for a small GPS tracker.
Best for
Riders wanting extra theft protection
Why we like it
The Lamicall cage installs on the handlebar or down tube with two included screws, and an adjustable knob fits different bottle sizes. A hidden compartment holds a small GPS tracker such as an AirTag.
It suits a trike with a tube that accepts a clamp, or with bosses. The adjustable arm is a plus for odd bottles. Check the mounting positions on your frame.
Key specs
| Fit and mounting | Handlebar or down tube, two screws |
|---|---|
| Features | Adjustable knob, hidden tracker slot |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Hidden tracker compartment
- Adjustable for different bottles
- Handlebar or tube mount
- Screws included
Limitations
- Needs a compatible tube or bosses
- Adds bulk
Consider it if
- Parked trikes
- Odd-sized bottles
Skip it if
- Riders with no mounting points
Best If You Have Bosses4 of 5
FiveBox Aluminum Bottle Cage
A light aluminum cage for frames with standard threaded holes.
Best for
Frames with bottle bosses
Why we like it
This cage fits bottles from 23 to 28 oz and mounts with two screws on frames with threaded holes spaced 56 to 71 mm. It uses aluminum alloy for rust resistance and low weight.
It needs a 4 mm hex key and a frame with threaded holes, so it is a fit only if your trike has bosses. If it does, it is cheaper and lighter than the clamp holders.
Key specs
| Fit and mounting | Two screws at 56 to 71 mm spacing |
|---|---|
| Features | Aluminum alloy, fits 23 to 28 oz bottles |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Light aluminum alloy
- Standard screw spacing
- Two screws included
- Holds 23 to 28 oz bottles
Limitations
- Needs threaded frame holes
- Needs a 4 mm hex key
Consider it if
- Trikes with bosses
- Weight-conscious riders
Skip it if
- Frames without bosses
Lightest Pick5 of 5
ROCKBROS Ultralight Bottle Cage
A 35 g polycarbonate cage with screws and a 3 mm key.
Best for
Frames with bosses
Why we like it
The ROCKBROS cage weighs 35 g and is made of high-quality PC material. It comes with two screws and a 3 mm Allen wrench and installs in under a minute on a frame with pre-drilled holes.
Like the FiveBox, it needs bosses. It is lighter but plastic, so aluminum may feel stiffer. It suits a trike with bosses and a light touch.
Key specs
| Fit and mounting | Pre-drilled frame holes, two screws |
|---|---|
| Features | 35 g PC material, 3 mm wrench included |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Only 35 g
- Wrench and screws included
- Quick installation
- Fits most cycling bottles
Limitations
- Needs pre-drilled holes
- Plastic rather than metal
Consider it if
- Light trikes with bosses
- Simple installs
Skip it if
- Frames without holes
Spec Comparison
Key figures side by side. A dash means the brand gives no figure, so ask before you buy if it matters to you.
| Model | Fit | Features | Link |
|---|---|---|---|
| Accmor Universal Cup Holder Best Overall | Rubber-pad clamp, 360 degree rotation | Holds cups and bottles up to 3.4 in wide | Check price |
| Accmor Cup Holder with Phone Holder Best 2-in-1 | Rubber-pad bar clamp, 360 degree rotation | Cup holder plus phone holder | Check price |
| Lamicall Bike Bottle Holder with Tracker Storage Best for Theft Worry | Handlebar or down tube, two screws | Adjustable knob, hidden tracker slot | Check price |
| FiveBox Aluminum Bottle Cage Best If You Have Bosses | Two screws at 56 to 71 mm spacing | Aluminum alloy, fits 23 to 28 oz bottles | Check price |
| ROCKBROS Ultralight Bottle Cage Lightest Pick | Pre-drilled frame holes, two screws | 35 g PC material, 3 mm wrench included | Check price |
How We Chose These Water Bottle Cages for Tricycles
- Mounting without bosses
- We favored holders that clamp to a bar or tube, since most trikes lack threaded bosses.
- Bottle fit
- We compared stated bottle sizes and adjustment.
- Install effort
- Tool-free clamps were separated from screw-mounted cages.
- Extras
- Features such as a tracker slot or a phone pocket were noted.
What to Look for in a Water Bottle Cage for Tricycles
Threaded bosses
A normal cage needs two threaded holes in the frame. Most trikes lack them.
Look at the frame tubes before ordering, or choose a clamp holder.
Bar diameter
A clamp must fit the bar. Trike bars are often 22.2 or 25.4 mm.
Measure and compare to the stated clamp range.
Bottle width
A holder has a maximum diameter. Insulated bottles are often wider.
Measure the widest point of your bottle.
Reach and clearance
On a wide bar, a holder can block levers or mirrors.
Plan its position before tightening.
How to Choose
By Mounting
| Situation | Our pick | Why |
|---|---|---|
| No bosses, want a clamp | Accmor Universal Cup Holder | Clamps on the bar |
| No bosses, want a phone too | Accmor Cup Holder with Phone Holder | Cup plus phone |
| Tube or bar, with tracker | Lamicall Bike Bottle Holder | Tracker slot |
| Has threaded bosses | FiveBox Aluminum Bottle Cage | Aluminum, standard spacing |
| Has bosses, lightest | ROCKBROS Ultralight Bottle Cage | 35 g |
Clamp Holder vs Frame Cage
- Clamp holder
- The Accmor holders and Lamicall cage mount without frame holes but add bulk to the bar.
- Frame cage
- The FiveBox and ROCKBROS cages are lighter and neater but need threaded bosses.
Default to a clamp holder unless your frame clearly has bosses.
For Coffee and Tall Cups Specifically
- Look for
- A holder that grips cups, not only bottles, with silicone petals.
- In this comparison
- The Accmor Universal Cup Holder takes cups up to 3.4 inches wide.
When to Spend More
- Spend more if
- You want a phone too or worry about theft. The Accmor 2-in-1 and Lamicall add those.
- Save if
- You only carry water and have bosses. The ROCKBROS cage is light and basic.
Frequently Asked Questions
Do trikes have bottle cage mounts?
Many do not. Check for two threaded holes on a frame tube; if there are none, use a clamp holder like the Accmor.
Will a cup holder hold a large bottle?
The Accmor takes cups and bottles up to 3.4 inches in diameter. Measure your bottle.
What is the tracker slot for?
The Lamicall has a hidden compartment for a small GPS tracker such as an AirTag.
How do I mount a cage with no bosses?
Use a clamp holder, or the Lamicall on a bar or tube. Do not drill into the frame.
Are clamp holders stable on rough paths?
The Accmor uses a rubber pad and silicone petals to keep a drink in place. Tighten the clamp and check it each ride.
Bottom Line
Choose the Accmor holder if your trike has no bosses, and the FiveBox cage if it does. Measure your bar and bottle before ordering.