Best
Best Lock-On Bicycle Grips for Adult Tricycles
A lock-on clamp stops grips from twisting, but length and bar diameter still need a check.
Updated · 3 min read · 5 products evaluated
Lock-on grips use an aluminum ring that clamps the grip to the bar, so it cannot spin when you steer or when your hands are sweaty. That matters on a trike, where you steer with your arms rather than lean, and a twisting grip pulls on the brake lever.
We kept five pairs, from single-clamp grips to a double-lock pair. Most fit 22.2 mm bars, but one is made for 20 to 22 mm, and lengths run from 130 to 133 mm, so measure your bar and the space left for levers before you order.
Short answer
GPMTER is our pick for most riders, with a single aluminum clamp, an extra gel layer, 131 mm length and a 22.2 mm fit. Corki uses a double lock at 110 grams a pair, BUCKLOS is a plain 133 mm single clamp, PNW Loam offers two thicker sizes, and JETCAT is an XL pair.
Quick Picks
Our 5 recommendations at a glance. Tap a pick for the full verdict.
Our Picks
Best Overall1 of 5
GPMTER Single Lock-On Grips
Non-slip rubber grips with an extra gel layer and a single aluminum alloy clamp, 131 mm long, fitting 22.2 mm bars.
Best for
General trike use
Why we like it
The grip is high-friction rubber with a gel layer added for a softer touch, and one aluminum alloy ring clamps it to the bar. Length is 131 millimeters, and it fits 22.2 mm (0.87 inch) bars, which covers most beach cruiser, folding and commuter bikes.
It adds a gel layer that the plain BUCKLOS lacks, and its single clamp is lighter than the Corki double lock. The clamp sits on the inside end, so a lever can be set close to it. Check that your bar end is long enough for 131 mm before ordering.
Key specs
| Size | 131 mm long, 22.2 mm bars |
|---|---|
| Fit and mounting | Single aluminum lock ring |
| Features | High-friction rubber, gel layer |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Gel layer adds a soft feel
- Single aluminum clamp
- 131 mm length
- Fits 22.2 mm bars
Limitations
- Single clamp only
- Plain shape
Consider it if
- Everyday riders
- Wet-weather use
Skip it if
- Riders with 20 mm bars
Best Double Clamp2 of 5
Corki Double Lock-On Grips
TPR and aluminum grips with a lock ring at each end, 130 mm long, 110 grams a pair, for 20 to 22 mm bars.
Best for
Extra hold on rough roads
Why we like it
Both ends have an aluminum ring, which holds the grip evenly. The material is soft TPR with aluminum, the length is 130 millimeters, and the pair weighs 3.88 ounces, or 110 grams. It is made for bars with outer diameter between 20 and 22 millimeters.
It is a double lock, so it resists twisting more than the single clamp on GPMTER or BUCKLOS. The 20 to 22 mm range is narrower than the 22.2 mm bar on most trikes, so measure before you order. It suits a rider who wants a firm hold on rough ground.
Key specs
| Size | 130 mm long, bars 20 to 22 mm |
|---|---|
| Fit and mounting | Double aluminum lock rings |
| Features | TPR and aluminum, 110 g per pair |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Lock ring at both ends
- Light at 110 grams a pair
- 130 mm length
- Soft TPR material
Limitations
- Bar range is 20 to 22 mm
- No extra padding layer
Consider it if
- Rough roads
- Riders who want extra hold
Skip it if
- Riders who have not measured the bar
Best Plain Option3 of 5
BUCKLOS Single Lock-On Grips
Thermoplastic rubber grips, 133 mm long, with a ridged turbine surface and an aluminum alloy lock ring for 22 to 23 mm bars.
Best for
Simple replacement
Why we like it
The grip is soft thermoplastic rubber with a ridged turbine surface. A single aluminum alloy ring locks it, and the length is 133 millimeters with a 22.2 mm inner diameter. It fits bars with an outer diameter between 22 and 23 millimeters.
It is the longest grip here, which covers more of the bar but leaves less room for levers than the 130 mm Corki. There is no added gel layer. It suits a simple replacement on a wide bar where length is not an issue.
Key specs
| Size | 133 mm long, 22.2 mm inner diameter |
|---|---|
| Fit and mounting | Single aluminum lock ring |
| Features | Thermoplastic rubber, ridged surface |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Soft thermoplastic rubber
- Ridged non-slip surface
- Aluminum lock ring
- Fits 22 to 23 mm bars
Limitations
- Longest grip at 133 mm
- Basic shape
Consider it if
- Simple replacement
- Wide bars
Skip it if
- Crowded bars
Best Size Choice4 of 5
PNW Components Loam Lock-On Grips
Tacky 25A rubber lock-on grips in 30 mm Regular or 34 mm XL, with a single clamp, closed end and about 90 or 120 grams a pair.
Best for
Choosing grip thickness
Why we like it
The rubber is a tacky 25A compound, with thin horizontal strips for feel and a thicker pattern to support the palm. A single clamp and closed end keep it secure on 22.2 mm bars. The 30 mm Regular weighs about 90 grams and the 34 mm XL about 120 grams per pair.
It is the only pair here with a size choice, which helps if your hands need a thicker or thinner grip. The XL adds comfort for bigger hands, at the cost of a fatter grip. Check that you select the size you want, since the options differ.
Key specs
| Size | 30 mm or 34 mm thick, 22.2 mm bars |
|---|---|
| Fit and mounting | Single lock-on clamp, closed end |
| Features | 25A tacky rubber, two size options |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Two size options
- Tacky rubber for grip
- Closed end for durability
- Light at 90 or 120 grams a pair
Limitations
- Trail styling
- Must pick the right size
Consider it if
- Larger hands
- Riders who want a thicker grip
Skip it if
- Riders who want a slim grip
Best for Big Hands5 of 5
JETCAT XL Lock-On Grips
XL rubber lock-on grips with end caps, made for adults with larger hands and available in several colors.
Best for
Larger hands
Why we like it
The rubber grips are sized XL for larger hands and use a lock-on design to prevent slipping or rotation. Secure-fitting end caps are included, and the pairs come in a range of colors. They are made for bikes, e-bikes and scooters.
It gives a thicker grip than the Corki or GPMTER, which suits bigger hands. Measure your bar length and diameter before ordering, since both vary by size. It is the fun-colored choice, though not the choice for a rider who wants a slim grip.
Key specs
| Features | XL size, lock-on design, end caps, several colors |
|---|
Specs can change between model years; confirm the exact version before buying.
Strengths
- XL size for larger hands
- Lock-on design
- End caps included
- Several color options
Limitations
- Check length before ordering
- Check bar diameter before ordering
Consider it if
- Larger hands
- Riders who like color
Skip it if
- Riders who need precise length
Spec Comparison
Key figures side by side. A dash means the brand gives no figure, so ask before you buy if it matters to you.
| Model | Size | Fit | Features | Link |
|---|---|---|---|---|
| GPMTER Single Lock-On Grips Best Overall | 131 mm long, 22.2 mm bars | Single aluminum lock ring | High-friction rubber, gel layer | Check price |
| Corki Double Lock-On Grips Best Double Clamp | 130 mm long, bars 20 to 22 mm | Double aluminum lock rings | TPR and aluminum, 110 g per pair | Check price |
| BUCKLOS Single Lock-On Grips Best Plain Option | 133 mm long, 22.2 mm inner diameter | Single aluminum lock ring | Thermoplastic rubber, ridged surface | Check price |
| PNW Components Loam Lock-On Grips Best Size Choice | 30 mm or 34 mm thick, 22.2 mm bars | Single lock-on clamp, closed end | 25A tacky rubber, two size options | Check price |
| JETCAT XL Lock-On Grips Best for Big Hands | — | — | XL size, lock-on design, end caps, several colors | Check price |
How We Chose These Lock-On Bicycle Grips
- Real lock-on design
- We kept grips with an aluminum lock ring or ring pair. Slip-on grips that rely on friction alone were left out, since they can twist.
- Bar fit
- We compared the stated bar diameters, which run from 20 to 23 millimeters. Most trikes use 22.2 mm, so a narrow-range grip needs a measurement first.
- Length and layout
- We looked at lengths from 130 to 133 millimeters. A shorter grip leaves more room for brake levers, bells and twist shifters on a crowded trike bar.
- Thickness and material
- We noted rubber, TPR, gel layers and the two PNW sizes. Grip thickness changes how your hand closes, so a choice of size counts for something.
What to Look for in a Lock-On Bicycle Grip
Single vs double clamp
A single clamp locks one end, and a double clamp locks both. The second ring holds the free end tight on rough roads.
If you ride on rough pavement, a double lock like the Corki holds better. A single clamp is fine on smooth paths.
Bar diameter
A lock-on grip clamps to the bar, so a bar that is too small leaves a gap. Most adult trikes use 22.2 mm bars, but some use other sizes.
Measure your bar with calipers and compare with each grip's stated range. Do not rely on a generic fits-most claim.
Length and controls
Grips share the straight bar with brake levers, bells and shifters. A 133 mm grip leaves less room than a 130 mm grip.
Check twist shifters and levers before ordering. Measure from the bar end to the lever clamp, and confirm you have the length.
Thickness and hand size
A thicker grip lets large hands relax, while a thin grip feels better in small hands. Padding and tacky rubber spread pressure on the palm.
Choose a diameter your fingers can close around easily. PNW and JETCAT offer larger sizes, but we cannot promise any grip treats pain.
How to Choose
By Handlebar Setup
| Situation | Our pick | Why |
|---|---|---|
| Standard 22.2 mm bar | GPMTER Single Lock-On Grips | 131 mm and a stated 22.2 mm fit |
| Rough roads | Corki Double Lock-On Grips | Lock rings at both ends resist twisting |
| Wide bar with spare length | BUCKLOS Single Lock-On Grips | 133 mm covers more of the bar |
| Bar with levers and shifters | Corki Double Lock-On Grips | 130 mm leaves a little more room |
Single Clamp vs Double Clamp
- Single clamp
- GPMTER, BUCKLOS and PNW use one lock ring. It is lighter and easier to fit, and it holds well on smooth roads.
- Double clamp
- Corki locks both ends with aluminum rings. It resists twisting on rough ground, but it needs a bar diameter of 20 to 22 mm.
Most riders should pick a single clamp unless the road is rough or the grip has twisted before.
For Larger Hands Specifically
- Look for
- A thicker grip, a size choice and a tacky surface. Also check the length, so the thicker grip still leaves room for levers.
- In this comparison
- PNW Loam offers a 34 mm XL, and JETCAT is sold as XL. GPMTER has a gel layer if you prefer a normal size with extra softness.
When to Spend More
- Spend more if
- You want a thicker size choice or a closed-end trail design. PNW Loam gives two sizes and a tacky compound, which is a better fit than a plain grip.
- Save if
- You only need a simple replacement. BUCKLOS or GPMTER lock on firmly and cost less than the specialized PNW pair.
Frequently Asked Questions
Do lock-on grips work with twist shifters?
They can, but you must check length. A twist shifter takes space inside the grip, and a lock-on grip must leave room for it. Measure the free bar length and compare with the 130 to 133 mm grips here.
What bar diameter do lock-on grips need?
Most here fit 22.2 mm bars. Corki is made for 20 to 22 mm, and BUCKLOS fits 22 to 23 mm. Measure your bar with calipers before ordering, because a wrong size cannot be fixed with a clamp.
Is a double lock better than a single?
A double lock holds both ends and resists twisting on rough roads. A single clamp is lighter and easier to fit, and it is enough on smooth paths. Trike riders who steer hard may prefer the Corki double.
Can lock-on grips help with sore hands?
We cannot promise that. Grip diameter and padding spread pressure across the palm, which many riders find more comfortable. PNW and JETCAT offer larger sizes, but a bike fitter or doctor should advise on pain.
How do I install lock-on grips?
Slide the grip onto a clean, dry bar, then tighten the aluminum ring with a hex key. Set the grip angle first, since moving it later takes a loosened clamp. Check tightness after the first ride.
Bottom Line
GPMTER is our pick for most trikes, with a single clamp, gel layer and a 22.2 mm fit. Choose Corki for rough roads, PNW Loam or JETCAT for larger hands, and BUCKLOS as a plain replacement. Measure your bar and lever space before ordering.