Best
Best Lightweight Platform Pedals for Adult Tricycles
Lighter pedals help, but thread size and foot support still decide whether they suit a trike.
Updated · 3 min read · 5 products evaluated
Platform pedals give your foot a flat, wide base, and lighter versions use nylon, composite or aluminum to cut weight without losing area. On a trike you sit upright and pedal at a steady pace, so the real benefits are foot support, grip and easy removal.
We kept five pairs: aluminum from ROCKBROS, one-piece nylon from FBGAGH and BV, and composite pedals from Crankbrothers and OneUp. Confirm the crank thread first, since 9/16 inch fits most adult bikes and 1/2 inch fits one-piece cranks.
Short answer
ROCKBROS is our pick for most riders, with CNC aluminum, sealed bearings and a stated 302 gram weight on a 101 mm platform. FBGAGH is the lightest at 255 grams, OneUp is 355 grams with a larger platform, and Crankbrothers suits big shoes. BV needs a weight check.
Quick Picks
Our 5 recommendations at a glance. Tap a pick for the full verdict.
Our Picks
Best Overall1 of 5
ROCKBROS Aluminum Wide Platform Pedals
CNC aluminum pedals weighing 302 grams per pair with a 101 mm platform, sealed bearings and 9/16 inch thread.
Best for
Everyday trike riding
Why we like it
The body is CNC aluminum, the spindle is chrome-molybdenum steel, and sealed bearings keep water and dust out. A pair weighs 0.66 pounds, or 302 grams, and the platform is 101 millimeters wide. Stainless steel spikes on each side add grip, and left and right are marked L and R.
It is heavier than the nylon FBGAGH, but metal resists impact better. The stated fit is shoes under US size 12, so large shoes may overhang. Check the crank thread is 9/16 inch before ordering, because the pedals will not fit a 1/2 inch crank.
Key specs
| Size | 101 mm wide platform |
|---|---|
| Load limit | 0.66 lb (302 g) per pair |
| Fit and mounting | 9/16 inch thread |
| Features | CNC aluminum, sealed bearings, steel pins |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Light at 302 grams
- Sealed bearings
- 101 mm platform
- Left and right marked
Limitations
- Fits shoes under US 12
- 9/16 inch only
- Steel pins can scratch shins
Consider it if
- Daily riders
- Riders who want metal build
Skip it if
- Riders with large shoes
Lightest Pair2 of 5
FBGAGH One-Piece Nylon Platform Pedals
One-piece nylon pedals at 0.55 pounds, or 255 grams a pair, with reflective strips and a 9/16 inch thread.
Best for
Lowest weight
Why we like it
The pedals are one-piece nylon with a sealed bearing design and reflective strips on the body. A pair weighs 0.55 pounds, or 255 grams. They use the standard 9/16 inch thread and have L and R marks for easy installation. A dual-sided anti-slip surface gives grip.
It is lighter than the ROCKBROS by about 47 grams, but plastic can crack on a hard strike. The surface is basic, with no replaceable pins. It suits a rider who wants the lowest weight and reflective visibility, and who rides at an easy pace.
Key specs
| Load limit | 0.55 lb (255 g) per pair |
|---|---|
| Fit and mounting | 9/16 inch, not for 1/2 inch cranks |
| Features | One-piece nylon, reflective strips, sealed bearing |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Lowest weight at 255 grams
- Reflective strips on the body
- Clear left and right marks
- Sealed bearing design
Limitations
- Plastic body is basic
- Not for 1/2 inch cranks
Consider it if
- Weight savers
- Night riders
Skip it if
- Riders who need replaceable pins
Best Grip Platform3 of 5
OneUp Components Composite Pedals
Nylon composite pedals at 355 grams with a 115 by 105 mm platform, 10 pins per side and a chromoly axle.
Best for
Wide stable footing
Why we like it
The platform is nylon composite measuring 115 by 105 millimeters, with 10 hexagonal pins on each side, a chromoly steel axle and a 13.3 mm pedal height at the thinnest point. The convex profile suits the arch of the foot, and a pair weighs 355 grams.
It is 53 grams heavier than the ROCKBROS, but the platform is larger and the pins are replaceable. Confirm the crank thread before buying, so confirm thread size. It suits riders with larger shoes who want a firm, grippy base.
Key specs
| Size | 115 x 105 mm platform, 13.3 mm thick |
|---|---|
| Load limit | 355 g per pair |
| Features | Composite body, 10 pins per side, chromoly axle |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Large 115 x 105 mm platform
- 10 pins per side
- Replaceable pins
- Thin convex profile
Limitations
- Heavier than the nylon pairs
- Thread size needs checking
Consider it if
- Large shoes
- Riders who want firm grip
Skip it if
- Riders who want the lowest weight
Best for Big Shoes4 of 5
Crankbrothers Stamp 1 Gen 2 Large
Composite pedals with a 114 by 114 mm platform for US shoe sizes 10 to 15, replaceable pins and serviceable bearings.
Best for
Large feet
Why we like it
The nylon composite body has a 114 by 114 millimeter platform sized for US shoes 10 to 15. One-piece replaceable traction pins add grip, and fully serviceable IGUS bearings and seals are built for long life. Weight needs a check.
It is larger than the ROCKBROS and gives more support to big feet, and the bearings are serviceable, which the nylon FBGAGH is not. Check weight and crank thread before ordering, since neither is confirmed. It suits tall riders who find standard pedals too small.
Key specs
| Size | 114 x 114 mm platform |
|---|---|
| Features | Nylon composite, replaceable pins, serviceable IGUS bearings |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Platform sized for US 10 to 15
- Replaceable traction pins
- Serviceable bearings
- Composite body for low weight
Limitations
- Weigh the pair before relying on it
- Check crank thread before ordering
Consider it if
- Riders with large shoes
- Riders who want serviceable bearings
Skip it if
- Riders on a tight weight goal
Budget Pair5 of 5
BV 9/16 Inch Resin Bike Pedals
A two-pedal set with a one-piece resin body, boron steel spindle, a non-slip surface and 9/16 inch compatibility.
Best for
Simple low-cost swap
Why we like it
This set uses a one-piece resin body with a boron steel spindle and an EPB bearing system. The surface is non-slip, and the thread is 9/16 inch, which suits e-bike, city and commuter use. The resin resists corrosion.
It is described as lightweight, but no weight is given, so it may not beat the 255 gram FBGAGH. Compare the platform size with your current pedals. It suits a rider who wants a simple, low-cost swap for stock plastic.
Key specs
| Fit and mounting | 9/16 inch |
|---|---|
| Features | One-piece resin, boron steel spindle, EPB bearing |
Specs can change between model years; confirm the exact version before buying.
Strengths
- Corrosion-resistant resin body
- Boron steel spindle
- 9/16 inch thread
- Non-slip surface
Limitations
- Weight needs a check
- Compare platform size with your own pedals
Consider it if
- Simple swaps
- Commuter use
Skip it if
- Weight-focused buyers
Spec Comparison
Key figures side by side. A dash means the brand gives no figure, so ask before you buy if it matters to you.
| Model | Size | Load limit | Fit | Features | Link |
|---|---|---|---|---|---|
| ROCKBROS Aluminum Wide Platform Pedals Best Overall | 101 mm wide platform | 0.66 lb (302 g) per pair | 9/16 inch thread | CNC aluminum, sealed bearings, steel pins | Check price |
| FBGAGH One-Piece Nylon Platform Pedals Lightest Pair | — | 0.55 lb (255 g) per pair | 9/16 inch, not for 1/2 inch cranks | One-piece nylon, reflective strips, sealed bearing | Check price |
| OneUp Components Composite Pedals Best Grip Platform | 115 x 105 mm platform, 13.3 mm thick | 355 g per pair | — | Composite body, 10 pins per side, chromoly axle | Check price |
| Crankbrothers Stamp 1 Gen 2 Large Best for Big Shoes | 114 x 114 mm platform | — | — | Nylon composite, replaceable pins, serviceable IGUS bearings | Check price |
| BV 9/16 Inch Resin Bike Pedals Budget Pair | — | — | 9/16 inch | One-piece resin, boron steel spindle, EPB bearing | Check price |
How We Chose These Lightweight Platform Pedals
- Weight with grip
- We kept pedals described as lightweight and compared stated weights, from 255 to 355 grams per pair. Two pairs come without a weight, so they carry a weigh-it-yourself check.
- Platform size
- We compared platform widths, from 101 mm up to 115 mm. A wider platform supports the foot better, especially on a trike where you pedal slowly.
- Thread and fit
- We checked the 9/16 inch thread where it is stated. A 1/2 inch crank will not take these pedals, so thread is the first thing to confirm.
- Materials and bearings
- We looked at aluminum, nylon, resin and composite bodies and at sealed or serviceable bearings. Bearing care decides how long a pedal spins smoothly.
What to Look for in a Lightweight Platform Pedal
Crank thread
Most adult bikes use 9/16 inch pedal threads, while some one-piece cranks use 1/2 inch. A pedal with the wrong thread will not screw in.
Look at the stamp on your old pedal or the crank, and confirm before ordering. Do not force a pedal that does not turn by hand.
Platform size and shoe fit
A wide platform spreads pressure across the sole. If the shoe overhangs, the foot rocks, and a small platform feels slippery in the wet.
Compare the platform dimensions with your shoe length. Larger shoes need 114 mm or more, such as the Crankbrothers or OneUp.
Weight and material
Aluminum is stiffer and tougher but heavier, while nylon and composite cut weight and absorb light strikes. On a trike, rotating weight matters little, so durability often wins.
Compare the pair weights. Under 300 grams is light, but a 355 gram composite pedal with pins may feel better underfoot.
Pins and easy release
Pins grip the sole but can scrape shins if your foot slips. A trike rider must be able to lift off and put down a foot without catching.
Choose shorter pins or replaceable pins. Test on a quiet street before riding in traffic.
How to Choose
By Priority
| Situation | Our pick | Why |
|---|---|---|
| Everyday riding with metal build | ROCKBROS Aluminum Wide Platform Pedals | 302 grams, sealed bearings and a 101 mm platform |
| Lowest weight | FBGAGH One-Piece Nylon Platform Pedals | 255 grams per pair with reflective strips |
| Large shoes | Crankbrothers Stamp 1 Gen 2 Large | 114 mm platform for sizes 10 to 15 |
| Low-cost swap | BV 9/16 Inch Resin Bike Pedals | Simple 9/16 inch pedals at a low price |
Aluminum vs Composite
- Aluminum
- ROCKBROS gives a CNC aluminum body at 302 grams. Metal resists scrapes and impact, and it holds its shape over time, but the pins can be sharp.
- Composite
- FBGAGH, OneUp, Crankbrothers and BV use nylon, composite or resin. They cut weight and spread light strikes, and OneUp and Crankbrothers add replaceable pins.
Most riders should pick aluminum for toughness unless weight or shin safety matters more.
For Trike Riders Specifically
- Look for
- A wide platform, easy foot release and a thread that fits your crank. Low-profile pins are also a good idea, because trike stops involve frequent foot placement.
- In this comparison
- ROCKBROS has a 101 mm platform and sealed bearings. OneUp adds 115 by 105 mm of support with 10 pins per side, and FBGAGH keeps the weight low.
When to Spend More
- Spend more if
- You have large shoes or want serviceable bearings. Crankbrothers and OneUp give bigger platforms and replaceable pins, which matter for steady footing.
- Save if
- You ride short, easy routes. FBGAGH or BV provide light, simple pedals without paying for a larger platform you may not need.
Frequently Asked Questions
Do these pedals fit every trike?
Most adult trikes use 9/16 inch threads, and FBGAGH, ROCKBROS and BV state that thread. Some one-piece cranks use 1/2 inch, which will not accept these pedals. Check your old pedal or crank stamp first.
Are lighter pedals worth it on a trike?
A trike is heavy, so a few grams matter little. A lighter pedal still helps when lifting a leg over a low frame or when swapping from a heavier plastic pair. Focus on platform size and foot support first.
Which pedal is best for large shoes?
Crankbrothers Stamp 1 Gen 2 Large is sized for US 10 to 15 with a 114 by 114 mm platform. OneUp at 115 by 105 mm is also wide. ROCKBROS suits shoes under US 12, so a larger shoe may overhang.
Do I need pins on a trike pedal?
Pins add grip in rain, but they can scrape a shin if your foot slips. FBGAGH has a basic anti-slip surface, while OneUp and Crankbrothers use replaceable pins. Choose based on your shoes and how often you step down.
How do I install the pedals?
Pedals are marked L and R, and the left pedal has a reverse thread. Thread each by hand to avoid cross-threading, then tighten with a pedal wrench. Grease the thread lightly to help future removal.
Bottom Line
ROCKBROS is the best all-round pick, with metal, sealed bearings and a stated 302 gram weight. Choose FBGAGH for the lowest weight, OneUp or Crankbrothers for big shoes, and BV for a simple swap. Confirm crank thread before you order any pair.